.75 And 1 Ton Full-Size Trucks - 8 Lug Diesel Truck Magazine
Gallery
Transmission Pan, Cooler, and Programmer Install - Pure Cool
Installing a Mag-Hytec Transmission Pan, Ford 40K-GVWR Transmission Cooler, and an Edge Evolution in an '01 F-250 Super Duty 
return to article
< previous photo 
Photo 13 of 25
next photo >
Transmission Pan Transmission Cooler Edge Evolution Install Egt Plug End
Now bring the EGT plug end through the firewall and route it without interference toward the Edge connector to the ODB II port and plug it into the right side as shown. In order to start the OBD II cable routing, leave the unit plugged into the port and route the pod cable over to the far left, avoiding the parking brake mechanism.
Transmission Pan Transmission Cooler Edge Evolution Install Door Seal Transmission Pan Transmission Cooler Edge Evolution Install Edge Pod Transmission Pan Transmission Cooler Edge Evolution Install Tape Brackets Transmission Pan Transmission Cooler Edge Evolution Install Cables Plug In Transmission Pan Transmission Cooler Edge Evolution Install Remove Retainers Transmission Pan Transmission Cooler Edge Evolution Install Old Trans Cooler

 

Ford F150 Research
Ford F150 Save gas with an economical Ford F150. You may also want to check out the new Chevy Suburban for all your trailer towing needs, or the fuel-saving capabilities available on the new Dodge Ram 1500.